Laboratory Tests

No-Burn® is committed to rigorous product testing and continuous product improvement. No-Burn® products have been tested according to a number of applicable national standards over a variety of substrates.

The Testing Standards met include those published by the following organizations:

• ASTM International
• Underwriters Laboratories
• Underwriters Laboratories Canada
• NFPA
• California State Fire Marshal

All tests have been conducted by nationally accredited independent tested laboratories such as:

• Western Fire Center
• Southwest Research Institute
• SGS U.S. Testing Company Inc
• Omega Point Laboratories
• Intertek
• Underwriters Laboratories
• PBR

TEST RESULTS

NO-BURN® PLUS^*

1. Class A rating. Tested per ASTM E-84-05 (Intertek Report No. 3083068)

2. Class A rating. Tested per ASTM E-84-05 30 minute test (Intertek Report No. 3083068)

3. Class A rating. Tested per ASTM E-84-05 (7 overcoats of paint) (Intertek Report No. 3104972SAT-001)

NO-BURN® PLUS Mih^* is:

1. UL Classified under UL 723 (R20493)

2. Achieved zero mold growth. Tested per ASTM D5590-94 (PBR 030819-8-A)

*for details of specific tests conducted on various products, refer to the individual test reports.

No Burn Products Summary Tabulation

Flame Spread	Smoke Developed	Substrate	Class	Overcoat	Test Standard	Test Report
NB Plus
5	25	Douglas Fir	A	NA	ASTM E-84-05 (30 min)	Intertek # 3083068 Rev 1 10-4-2005
15	20	Gypsum Board	A	Seven Overcoats Latex Paint	ASTM E-84-05	Intertek # 3104972SAT-001 9-18-2006
NB Plus Mih
5	50-110	Douglas Fir	A	NA	UL 723	UL BMQX.R20493 4-17-2006

NB Plus (Room Corner Test)
Pass/Fail	Substrate	Duration of Test	Test Standard	Test Report
Passed	Wood Studs & OSB	30 minutes	NFPA 286	WFCI Report No. 07020B
Passed	OSB	60 minutes	NFPA 286	WFCI Report No. 07020C
Passed	Plywood	30 minutes	NFPA 286	WFCI Report No. 07020D